| |
|
|
 |
 |
| |
Product Code |
Product Suffix |
Product Description |
|
Product: |
AM100 |
|
AERO-MAX Cut-In Clear |
|
Used In: |
Diamont |
|
Used As: |
Clear |
|
|
|
|
Things to DO:
* Do spray product in properly ventilated area.
* Do use the appropriate NIOSH/MSHA respirator. Consult product label for details.
* Do shake container for one minute after mixing ball rattles and spray a small area to test product before starting the job.
* Do turn the container over and spray to clear the nozzle when spraying is completed.
* Do allow AM100 to flash for 15 minutes before force drying at 160°F for 30 minutes.
* Do allow Diamont Basecoat colors to flash 15 minutes, but no longer than 12 hours before applying AM100.
Things NOT to DO:
* Do not leave or store containers in direct sunlight. Normal recommended storage: 50°F to 100°F.
* Do not attempt to recoat, sand or compound AM100 until the finish has dried a minimum of 16 hours.
* Do not incinerate container. Contents under pressure.
|
 |
|
|
