Application Properties / Characteristics
Coverage
Dry Film Thickness
Drying at Forced Conditions
Drying at Room Temperature
Flash Time Between Coats
Gun (Gravity) HVLP Nozzle
Gun (Gravity) Nozzle
Gun (Pressure) HVLP Nozzle
Gun (Suction) Nozzle
Gun Pressure (Conventional)
Gun Pressure (HVLP)
Material
Mixing Ratio Instructions
No. of Coats
Pot Life
Remarks/Comments
Sanding/Preparation
Substrates/Pretreatment
Viscosity RFU
VOC Ready For Use

 
Help Refine Your Search
 
  Product Code Product Suffix Product Description
Product: DC5300 CTR Baking Clear
Used In: Diamont & UNO
Used As: Clear
Remarks/Comments
Things to DO:
* Do use the appropriate NIOSH/MSHA respirator. Consult product label/MSDS for details.
* Do use 809 Fisheye Eliminator in DC5300 if necessary.
* Do bake immediately for best results.
* Do use the DC5300 mixture within one hour for best results.
* Do use DH47 for hot weather conditions.
* Do use DH42 in cool weather to decrease dry time.
* Do add up to a maximum of 1 ounce of Jet95, to improve cure time at 140°F. One ounce equates to 25 grams Jet95 per gallon of unhardened DC5300 Clear.
* Do add up to a maximum of 3 ounces of Jet95, to improve cure time at 120°F. Three ounces equates to 75 grams Jet95 per gallon of unhardened DC5300 Clear.

Things NOT to DO:
* Do not add more or less of the hardeners. Measure the amount - DO NOT ESTIMATE.
* Do not use DC5300 if the shop temperature is below 15°C/60°F.
* Do not use HR5 Jet5 or Jet95 if DH42 Hardener is used.
* Do not use Jet95 with baking temperatures higher than 140°F.